Files are compressed in .7z, if you cant decompress them try 7-Zip. Inside you will find .pdo files you will need Pepakura Viewer to open them.

Fallout

T-51b Power Armor

Power Armor + Gatling Laser
DOWNLOAD

Difficulty: VERY HARD (w. some parts need to be scratch built)

T-51b Power Armor from Fallout

Fallout 4 finally gave us some decent power armor models I felt like investing time and effort to unfold and build. I'm a huge fan-boy of the West Coast Brotherhood of Steel so the armor has more or less the same markings as in Fallout 1. The Gatling laser is of the Fallout 4 variant, because I felt the HK L30 Gatling laser model I've made for Fallout 3 wasn't up to the detail the armor needed.

WARNING: Some parts are without flaps because I glued them using just the cutting edges, or used other techniques (e.g wires wrapped in layers of paper for most pipes) to build. There's a build thread on Zealot.com, I'd advise any potential builder to check it out before printing out the template.

Original texture and model belongs to Bethesda / ZeniMax.

Skyrim - TES V

Frost Dragon - Viinturuth (MkII)

Word Wall and new Texture
DOWNLOAD

4k dragon texture (Requires High-res version of pepakura designer)
DOWNLOAD

Difficulty: VERY HARD

Frost Dragon from The Elder Scrolls V: Skyrim

Updated version of the template below. Has a new texture and a Word Wall to stand on. I've also includedsome reinforcing parts for the legs. I would STRONGLY recommend to use wire/wood/expanding foam or really thick paper to strengthen the model because the model CANNOT support it's own weight on its own.

Original texture and model belongs to Bethesda / ZeniMax.

Frost Dragon - Viinturuth

Model of the Month at Zealot Hobby Forums: My Build (04/2012) and DanBKing's Build (03/2013)

PDO version (use Pepakura to open it)
DOWNLOAD
DOWNLOAD Lined

Difficulty: VERY HARD

Frost Dragon from The Elder Scrolls V: Skyrim

I know Viinturuth is a random kind of dragon, but it was a Frost Dragon for me and I have multiple save-files to prove it :P The model has a wingspan of 500mm and approx height of 460mm. I have also included some different shades for the rock it stands on. plus a three part texture that my good friend Hereticus baked for it in 3DS Max, that shows some extra details like veins in the wing membranes (the model I made is printed with the original textures). 690 parts overall.

Original texture and model belongs to Bethesda / ZeniMax.

Mass Effect

Nyreen Kandros (Omega DLC)

DOWNLOAD

Difficulty: VERY HARD

I had this template for a while now but took some time to build her, but here she is: The first female turian that graced the Mass Effect games. I built her with magnets in her soles, but she should be more or less balanced on her feet. I have included separate files for a transparent omni-tool, in case someone needs it (the one on the picture is not using all of the parts thou).

Original character belongs to Bioware

Tali'Zorah nar Rayya (Citadel DLC)

DOWNLOAD

Difficulty: VERY HARD

Tali'Zorah in the formal wear she wore briefly in the Citadel DLC. Based on a lithograph by Benjamin Huen.

There's a definite need to run a steel wire to hold this one up, mine runs in the cape/scarf so the legs don't actually have to touch the base. also the ring is somewhat big so id advise using some kind of extra bracing on the part where she sits. I've used a wooden dowel cemented in expanding foam on both ends. Also the template includes Tali face model and mask interior if you want to make the visor transparent.

Special thanks to SlipperyHammer for allowing me to use his rigged and modified mesh he made for his Tali Face Mod for the template. Made my job a LOT easier.

Also thanks to Danial Rashidi who gave me the idea to use the cape as a support.

Original character belongs to Bioware

EDI (ME3)

DOWNLOAD

Difficulty: VERY HARD

EDI from Mass Effect 3 (Alternate appearance pack DLC) with an Arc Pistol. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

Thanks to MEHEM (Mass Effect Happy ending mod) I'm finally over the atrociusly lame last 10 minutes of ME3 and ready to create more character templates. I've also included two versions for the visor, my build uses both versions (2-2 layers of both on printable platic sheets). Overall 507 parts. Height 435mm.

Thanks Sanek94ccol from DeviantArt for the simplified head mesh, made my job a lot easier.

Original texture and model belongs to Bioware

Legion (ME2)

DOWNLOAD

Difficulty: VERY HARD

Legion from Mass Effect 2 with an M-98 Widow Anti-Material Rifle. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

I've used the alternative appearance textures that you get after finishing Legion's Loyalty mission, but the .pdo files contain the default textures. I've included the alternative textures separately. I've also included a file with legs that does not stand on a box (I've needed a place for a battery box :) ), please note that these were NOT test built by me so there's a chance there are some flaps on the wrong sides of the seams or other "bugs".

The model you can see on the pictures was altered in some internal places to allow for the LED lights, please note that the template does not contain the parts for these changes.

Original texture and model belongs to Bioware

Garrus (ME3)

DOWNLOAD

Difficulty: HARD

Garrus's new Appearance from Mass Effect 3. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

The armor texture was modified by me because I liked the looks of Garrus's alternate appearance pack armor from ME2. The template has by default the original non-modified appearance, and has the one I've used as optional textures.

Mantis Sniper Rifle template is made by XenonRay

Original texture and model belongs to Bioware

Grunt

DOWNLOAD

Difficulty: HARD

Grunt from Mass Effect 2. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

Also included an M-920 Cain, Grunt must have the biggest and strongest weapon he can find.

Original texture and model belongs to Bioware

Niftu Cal (the Biotic GOD)

DOWNLOAD

Difficulty: HARD

Niftu Cal (Volus) from Mass Effect 2. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

I always liked the guy so I made a paper model version

Original texture and model belongs to Bioware

Blood Dragon Armor

DOWNLOAD

Difficulty: HARD

The Blood Dragon Armor from Mass Effect 2 (DLC). The model is approximately scaled to Xenonray's ME2 paper models for consistency.

For some reason the .pdo got corrupt if it contained the left hand. I couldn't fix it, even tried different model conversions. In the end i've made it a separate .pdf. If u want to resize the model, use the invert pattern option in Pepakura Designer, on the right hand. Ive made my model the same way so it should fit perfectly.

Original texture and model belongs to Bioware

SSV Normandy SR1

DOWNLOAD

Difficulty: HARD

The SSV Normandy from Mass Effect, the most gorgeous spacecraft I've ever seen. I've used some wire to stabilize the engine pods, just under the nozzle joints and trought the main body.

Original texture and model belongs to Bioware

Warhammer 40k

Tyranid Swarmlord

DOWNLOAD

Difficulty: HARD

A Tyranid Swarmlord from Hive Fleet Leviathan.

Made using Dawn of War 2: Retribution resources. The figure stands 36 cm tall. Overall 533 parts

Original texture and model belongs to Games Workshop and THQ/Relic.

Wolf Guard Terminator Space Wolves Chapter

DOWNLOAD

Difficulty: MEDIUM/HARD

Wolf Guard in Terminator Armor belonging to Blackmane Company of the Space Wolves. Equipment is Wolf Claws and Assault Cannon, with an optional Cyclone missile launcher.

Made using Dawn of War 2: Retribution resources. The figure stands 30 cm (Without the Cyclone Missile Launcher) tall. Please note that I've made some refinements on the model that are not included in the pdo files. for example the "fur" on the wolftails.

Original texture and model belongs to Games Workshop and THQ/Relic.

Veteran Devastator Marine, Ultramarines Chapter

DOWNLOAD

Difficulty: MEDIUM/HARD

Devastator Marine veteran using Heavy Plasma Gun, Ultramarines chapter 1st Company 4th Squad.

Made using Dawn of War 2: Retribution resources. Included an M36 Mentor Combi-Plasma look-alike, for those who don't want the Heavy Plasma Gun. The figure stands 30 cm (26.5 cm w.out plasma power pack) tall.

Original texture and model belongs to Games Workshop and THQ/Relic.

My texture work-files are availible for DOWNLOAD. Colour filters and insignias are on different layers, so its really easy to make new chapter colourings.

Battle Sister of the Adepta Sororitas

DOWNLOAD

Difficulty: MEDIUM/HARD

Originally the Sister superior of a Celetian Squad from Dawn of War. Just removed the ornament from the helmet.

Included a helmeted and a helmetless model. The figurine stands 24 cm tall.

Original texture and model belongs to Games Workshop and THQ/Relic, and I've used Hangar-8's SoB texture mod.

Others

Evil Imp

DOWNLOAD

Difficulty: EASY

The iconic support character from Zero Punctuation. I just love Yahtzee's reviews and this little character too, so I had to make one.

The wires that supports the various body parts, are basically just fixed there with glue so theres no intricate wire frame inside.

Original design is from Zero Punctuation